Tech | AsamBoi


infoFebruary 1, 20227min00

The beauty of SEO is that it’s something that anyone can do, and it’s much more accessible than one might think. Rather than spending money on traditional print ads or sponsored posts, investing time and effort into learning SEO basics and possibly purchasing a few tools can result in greater long-term value for the company. Republic, the top SEO in Malaysia, is an acclaimed firm when it comes to organic search. 

Republic, the Top SEO in Malaysia

 Here are a few reasons why one should use organic search to promote their brand.

  1. More Customers through Organic Search

Organic search accounts for 53.3 percent of all web traffic, and 60 percent of marketers say their best leads come from SEO-engaged customers because they are looking for a solution, and the business in question is filling that need by being one of the top results. To be seen by customers, one must be ranked on the first page of Google. Climbing to the top of the page can virtually quadruple the  click-through rate compared to the second place. The traffic is there, and if one ranks for key search words such as ‘dresses Malaysia‘ when the shop is a clothing store, they’ll get the proper customers. 

  1. A Trustworthy Web Experience

The authority one develops is solely dependent on getting to the front page and winning the top spot in a search result. One can have the best answer or resource available, but if users don’t have a good experience once they get on the site, the website will  have a hard time keeping them there.

That’s why technical SEO aspects like page speed, backlinks, and other authority-building elements are so important to a company’s online success. Playing by the guidelines of search engines forces one to keep their site in good form and makes it a regular priority to keep it healthy.

  1. Encourages One to Focus on Customer Experience

When it comes to one’s online experience, optimizing user experience is a key component of SEO that is becoming increasingly important. In 2021, Google prioritized user experience as a ranking factor, combining their new Core Web Vitals with past elements like page speed to determine whether or not the websites are offering a worthwhile engagement. This concept was also used by Featured Snippets and other in-search components, which draw answers, photos, and other useful material onto the search page itself. For enterprises, this simply means that one must concentrate on their consumers’ demands. 

Republic, the Top SEO in Malaysia
  1. Improves Brand Awareness

When one boosts their rankings, one tangential element outside of turning users into customers is overall brand awareness. The more touch points one generates just by getting to the main page and rising closer and closer to the top place, the better. Even if they don’t go into your site, potential buyers will begin to associate the brand with those solutions simply by being there.

This is especially critical if one is competing with other firms for specific search terms. When customers ask inquiries or directly search for the product or service one provides, they want to be at the top of their minds. And if one’s competitors own those searches, those organic sales will almost certainly go to them.

SEO requires endless amounts of patience and a vast understanding of how to optimize something. It is not an easy task and can only be properly completed by professionals. Republic is an SEO agency that specializes in solving a company’s SEO related problems. Republic SEO Malaysia is the number one SEO company in Malaysia. The agency takes over a business’s SEO needs and requirements completely, allowing the business to concentrate on other things. 

Republic, the Top SEO in Malaysia


infoJanuary 22, 20227min00

Any basic discrete device or physical entity in an electronic system that affects electrons or their associated fields is known as an electronic component. Electrical elements, which are conceptual abstractions describing idealized electronic components and elements, are not to be confused with electronic components, which are mainly industrial goods accessible in a single form. ELCOMP is a trusted online vendor and distributor of electronic components. The company is a specialized distributor of omron electronic components in Malaysia.

A multitude of electrical terminals or leads are found on electronic components. These wires connect to other electrical components to form an electronic circuit that performs a certain purpose (for example an amplifier, radio receiver, or oscillator). Basic electronic components can be packaged separately, as arrays or networks of similar components, or as integrated circuits in semiconductor integrated circuits, hybrid integrated circuits, or thick film devices. The following list of electronic components concentrates on the discrete versions of these components, considering packages as separate components.

Electronic circuits are constructed using a variety of fundamental electronic components. Circuit designs are never complete or work properly without these components. Resistors, diodes, capacitors, integrated circuits, and other components fall under this category.

  • Basic Electronic Components. 

Electronic components are the most basic discrete devices in any electronic system, and they are used in a variety of electronic areas. These are the fundamental elements utilized in the design of electrical and electronic circuits. There are at least two terminals on these components that are used to connect to the circuit. Electronic components can be classified based on their applications, such as active, passive, or electromechanical.

Omron Electronic Components in Malaysia

In designing an electronic circuit following are taken into consideration:

Basic electronic components: capacitors, resistors, diodes, transistors, etc.

Power sources: Signal generators and DC power supplies.

Measurement and analysis instruments: Cathode Ray Oscilloscope (CRO),  multimeters, etc.

  • Active Components. 

These components are used to generate electric power by amplifying electrical impulses. These components can be used as an AC circuit within electrical devices to protect against voltage and increase power. Because it is powered by electricity, an active component can carry out its activities. All of these components necessitate the use of an energy source that is ordinarily unavailable in a DC circuit. An oscillator, IC (integrated circuit), and transistor are all included in any high-quality active component.

  • Passive Components. 

These components are unable to incorporate mesh energy into an electronic circuit since they do not rely on a power source other than what is available from the AC circuit to which they are connected. As a result, they are unable to magnify, yet they can increase a current in other ways. Resistors, inductors, transformers, and capacitors are examples of two-terminal components.

  • Electromechanical Components. 

These components make mechanical changes, such as spinning a motor, using an electrical signal. These components, in general, use electrical current to create a magnetic field that allows physical movement to occur. Switches and relays of various types can be used in these types of components. Electromechanical devices are those that have both an electrical and a mechanical process. The mechanical movement of an electromechanical component generates electrical output when it is manually manipulated.

Omron Electronic Components in Malaysia


infoJanuary 2, 20226min00

Pipe fittings, whatever they may be, are an integral part of any engineering solution, even the most seemingly simple one. With the help of fittings, you can solder, twist and press in any strapping scheme you need.

The choice of fittings is yours

It will be a cheaper option, for example polypropylene, or more expensive and reliable, like a press. In any of the types of fittings there are all kinds of bends, American and connections, which gives you limitless possibilities for your solutions. Fittings are an integral part of the pipeline.

Its main task is to connect pipes at bends, branches and when changing from one diameter to another, as well as to connect identical pipes. The fitting is an indispensable part of the entire pipeline system, which allows the entire structure to be hermetically mounted, greatly simplifying the entire installation process. The use of fittings occurs during the installation of all plumbing, heating, sewerage systems, in municipal and industrial production. Since pipes are made of different materials, the fittings are selected accordingly. According to the raw materials from which they are made, pipe fittings are divided into: polypropylene fittings; steel fittings; cast iron fittings; brass fittings; copper fittings; stainless steel fittings;

Stainless steel fittings malaysia
  • Manufactured from the most modern material that made it more resistant to thermal and physical irritants. This allowed the polypropylene fittings and pipes to transport a more aggressive chemical environment that is heated to a hundred degrees. They have tightness, long service life, and are completely harmless in terms of the environment.
  • Corrosion-resistant and complete absence of rust allows the fitting and pipes to serve from 25 to 50 years without repair and replacement. The simplest installation and tightness of the connection allows the consumer to carry out the installation himself without any effort. The lightness of the pipes and fittings makes it easy to transport from point of departure to point of arrival.

Therefore, many European countries stratify and use this material for water supply and heating. For steel and cast iron systems, threaded fittings are used from a similar metal, which are rapidly developing towards metal connections of any kind. At the present time, it is difficult to imagine the repair or replacement of parts in the pipeline, which was originally laid by a metal water supply system. A cast iron fitting is used when transitioning a pipe from one diameter to another, when turning or branching, dismantling in case of repair or replacement of necessary parts.

The Use of the Cast Iron Fitting

The cast iron fitting is made directly by the method of casting a part. Stainless steel fittings malaysia is designed for threaded and welded joints of the structure, as well as couplings and locknuts on the squeegee. A steel fitting is made from a billet of a pipe on lathes with further use especially for your sewerage and plumbing. Copper fitting does not lend itself to corrosion, long-term, withstand temperatures from 200 below zero to 250 above zero Celsius.

It is used in water supply systems, sewerage technologies. Having proven itself, the copper fitting has become a convenient solution for communication systems, gas pipelines and heating systems. Copper fitting is often used due to its quick installation – its flexibility, smoothness and heat transmission.


infoJanuary 11, 20217min00

echnology can be defined as applications, tools, or processes that improve or simplify aspects of daily life. The vehicle you drive to work is an example of technology that makes your life easier. Or the Internet as a whole can be seen as a technology that has greatly improved our lives.